Tag: mesh

The basics of meshing Traefik 2.0 with Linkerd

A while ago, I blogged about Linkerd 2.x. In that post, I used a simple calculator API, reachable via an Azure Load Balancer. When you look at that traffic in Linkerd, you see the following:

Incoming load balancer traffic to a meshed deployment (in this case Traefik 2.0)

Above, you do not see this is Azure Load Balancer traffic. The traffic reaches the meshed service via the Azure CNI pods.

In this post, we will install Traefik 2.0, mesh the Traefik deployment and make the calculator service reachable via Traefik and the new IngressRoute. Let’s get started!

Install Traefik 2.0

We will install Traefik 2.0 with http support only. There’s an excellent blog that covers the installation over here. In short, you do the following:

  • deploy prerequisites such as custom resource definitions (CRDs), ClusterRole, ClusterRoleBinding, ServiceAccount
  • deploy Traefik 2.0: it’s just a Kubernetes deployment
  • deploy a service to expose the Traefik HTTP endpoint via a Load Balancer; I used an Azure Load Balancer automatically deployed via Azure Kubernetes Service (AKS)
  • deploy a service to expose the Traefik admin endpoint via an IngressRoute

Here are the prerequisites for easy copy and pasting:

apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: ingressroutes.traefik.containo.us

spec:
  group: traefik.containo.us
  version: v1alpha1
  names:
    kind: IngressRoute
    plural: ingressroutes
    singular: ingressroute
  scope: Namespaced

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: ingressroutetcps.traefik.containo.us

spec:
  group: traefik.containo.us
  version: v1alpha1
  names:
    kind: IngressRouteTCP
    plural: ingressroutetcps
    singular: ingressroutetcp
  scope: Namespaced

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: middlewares.traefik.containo.us

spec:
  group: traefik.containo.us
  version: v1alpha1
  names:
    kind: Middleware
    plural: middlewares
    singular: middleware
  scope: Namespaced

---
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: tlsoptions.traefik.containo.us

spec:
  group: traefik.containo.us
  version: v1alpha1
  names:
    kind: TLSOption
    plural: tlsoptions
    singular: tlsoption
  scope: Namespaced

---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: traefik-ingress-controller

rules:
  - apiGroups:
      - ""
    resources:
      - services
      - endpoints
      - secrets
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - extensions
    resources:
      - ingresses
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - extensions
    resources:
      - ingresses/status
    verbs:
      - update
  - apiGroups:
      - traefik.containo.us
    resources:
      - middlewares
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - traefik.containo.us
    resources:
      - ingressroutes
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - traefik.containo.us
    resources:
      - ingressroutetcps
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - traefik.containo.us
    resources:
      - tlsoptions
    verbs:
      - get
      - list
      - watch

---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: traefik-ingress-controller

roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: traefik-ingress-controller
subjects:
  - kind: ServiceAccount
    name: traefik-ingress-controller
    namespace: default

---
apiVersion: v1
kind: ServiceAccount
metadata:
  namespace: default
  name: traefik-ingress-controller

Save this to a file and then use kubectl apply -f filename.yaml. Here’s the deployment:

kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  namespace: default
  name: traefik
  labels:
    app: traefik

spec:
  replicas: 2
  selector:
    matchLabels:
      app: traefik
  template:
    metadata:
      labels:
        app: traefik
    spec:
      serviceAccountName: traefik-ingress-controller
      containers:
        - name: traefik
          image: traefik:v2.0
          args:
            - --api
            - --accesslog
            - --entrypoints.web.Address=:8000
            - --entrypoints.web.forwardedheaders.insecure=true
            - --providers.kubernetescrd
            - --ping
            - --accesslog=true
            - --log=true
          ports:
            - name: web
              containerPort: 8000
            - name: admin
              containerPort: 8080

Here’s the service to expose Traefik’s web endpoint. This is different from the post I referred to because that post used DigitalOcean. I am using Azure here.

apiVersion: v1
kind: Service
metadata:
  name: traefik
spec:
  type: LoadBalancer
  ports:
    - protocol: TCP
      name: web
      port: 80
      targetPort: 8000
  selector:
    app: traefik

The above service definition will give you a public IP. Traffic destined to port 80 on that IP goes to the Traefik pods on port 8000.

Now we can expose the Traefik admin interface via Traefik itself. Note that I am not using any security here. Check the original post for basic auth config via middleware.

apiVersion: v1
kind: Service
metadata:
  name: traefik-admin
spec:
  type: ClusterIP
  ports:
    - protocol: TCP
      name: admin
      port: 8080
  selector:
    app: traefik
---
apiVersion: traefik.containo.us/v1alpha1
kind: IngressRoute
metadata:
  name: traefik-admin
spec:
  entryPoints:
    - web
  routes:
  - match: Host(`somehost.somedomain.com`) && PathPrefix(`/`)
    kind: Rule
    priority: 1
    services:
    - name: traefik-admin
      port: 8080

Traefik’s admin site is first exposed as a ClusterIP service on port 8080. Next, an object of kind IngressRoute is defined, which is new for Traefik 2.0. You don’t need to create standard Ingress objects and configure Traefik with custom annotations. This new approach is cleaner. Of course, substitute the host with a host that points to the public IP of the load balancer. Or use the IP address with the xip.io domain. If your IP would be 1.1.1.1 then you could use something like admin.1.1.1.1.xip.io. That name automatically resolves to the IP in the name.

Let’s see if we can reach the admin interface:

The new Traefik 2 admin UI

Traefik 2.0 is now installed in a basic way and working properly. We exposed the admin interface but now it is time to expose the calculator API.

Exposing the calculator API

The API is deployed as 5 pods in the add namespace:

Calculator API exposed

The API is exposed as a service of type ClusterIP with only an internal Kubernetes IP. To expose it via Traefik, we create the following object in the add namespace:

apiVersion: traefik.containo.us/v1alpha1
kind: IngressRoute
metadata:
  name: calc-svc
  namespace: add  
spec:
  entryPoints:
    - web
  routes:
  - match: Host(`calc.1.1.1.1.xip.io`) && PathPrefix(`/`)
    kind: Rule
    priority: 1
    middlewares:
      - name: calcheader
    services:
    - name: add-svc
      port: 80

I am using xip.io above. Change 1.1.1.1 to the public IP of Traefik’s Azure Load Balancer. The add-svc that exposes the calculator API on port 80 is exposed via Traefik. We can easily call the service via:

curl http://calc.1.1.1.1.xip.io/add/10/10

20

Great! But what is that calcheader middleware? Middlewares modify the requests and responses to and from Traefik 2.0. There are all sorts of middelwares as explained here. You can set headers, configure authentication, perform rate limiting and much much more. In this case we create the following middleware object in the add namespace:

apiVersion: traefik.containo.us/v1alpha1
kind: Middleware
metadata:
  name: calcheader
  namespace: add
spec:
  headers:
    customRequestHeaders:
      l5d-dst-override: "add-svc.add.svc.cluster.local:80"

This middleware adds a header to the request before it comes in to Traefik. The header overrides the destination and sets it to the internal DNS name of the add-svc service that exposes the calculator API. This requirement is documented by Linkerd here.

Meshing the Traefik deployment

Because we want to mesh Traefik to get Linkerd metrics and more, we need to inject the Linkerd proxy in the Traefik pods. In my case, Traefik is deployed in the default namespace so the command below can be used:

kubectl get deploy -o yaml | linkerd inject - | kubectl apply -f -

Make sure you run the command on a system with the linkerd executable in your path and kubectl homed to the cluster that has Linkerd installed.

Checking the traffic in the Linkerd dashboard

With some traffic generated, this is what you should see when you check the meshed deployment that runs the calculator API (deploy/add):

Both the traffic generator (add-cli) and Traefik are meshed which results in a more detailed view of the traffic

If you are wondering what these services are and do, check this post. In the above diagram, we can clearly see we are receiving traffic to the calculator API from Traefik. When I click on Traefik, I see the following:

A view on the meshed Traefik deployment

From the above, we see Traefik receives traffic via the Azure Load Balancer and that it forwards traffic to the calculator service. The live calls are coming from the admin UI which refreshes regularly.

In Grafana, we can get more information about the Traefik deployment:

Linkerd metrics for Traefik in the Grafana dashboard that comes with Linkerd
More metrics

Conclusion

This was just a brief look at both Traefik 2 and “meshing” Traefik with Linkerd. There is much more to say and I have much more to explore. Hopefully, this can get you started!

Giving linkerd a spin

A while ago, I gave linkerd a spin. Due to vacations and a busy schedule, I was not able to write about my experience. I will briefly discuss how to setup linkerd and then deploy a sample service to illustrate what it can do out of the box. Let’s go!

Wait! What is linkerd?

linkerd basically is a network proxy for your Kubernetes pods that’s designed to be deployed as a service mesh. When the pods you care about have been infused with linkerd, you will automatically get metrics like latency and requests per second, a web portal to check these metrics, live inspection of traffic and much more. Below is an example of a Kubernetes namespace that has been meshed:

A meshed namespace; all deployments in this particular namespace are meshed which means all pods get the linkerd network proxy that provides the metrics and features such as encryption

Installation

I can be very brief about this: installation is about as simple as it gets. Simply navigate to https://linkerd.io/2/getting-started to get started. Here are the simplified steps:

  • Download the linkerd executable as described in the Getting Started guide; I used WSL for this
  • Create a Kubernetes cluster with AKS (or another provider); for AKS, use the Azure CLI to get your credentials (az aks get-credentials); make sure the Azure CLI is installed in WSL and that you connected to your Azure subscription with az login
  • Make sure you can connect to your cluster with kubectl
  • Run linkerd check –pre to check if prerequisites are fulfilled
  • Install linkerd with linkerd install | kubectl apply -f –
  • Check the installation with linkerd check

The last step will nicely show its progress and end when the installation is complete:

linkerd check output

Exploring linkerd with the dashboard

linkerd automatically installs a dashboard. The dashboard is exposed as a Kubernetes service called linkerd-web. The service is of type ClusterIP. Although you could expose the service using an ingress, you can easily tunnel to the service with the following linkerd command (first line is the command; other lines are the output):

linkerd dashboard

Linkerd dashboard available at:
http://127.0.0.1:50750
Grafana dashboard available at:
http://127.0.0.1:50750/grafana
Opening Linkerd dashboard in the default browser
Failed to open Linkerd dashboard automatically
Visit http://127.0.0.1:50750 in your browser to view the dashboard

From WSL, the dashboard can not open automatically but you can manually browse to it. Note that linkerd also installs Prometheus and Grafana.

Out of the box, the linkerd deployment is meshed:

Adding linkerd to your own service

In this section, we will deploy a simple service that can add numbers and add linkerd to it. Although there are many ways to do this, I chose to create a separate namespace and enable auto-injection via an annotation. Here’s the yaml to create the namespace (add-ns.yaml):

apiVersion: v1
kind: Namespace
metadata:
  name: add
  annotations:
    linkerd.io/inject: enabled

Just run kubectl create -f add-ns.yaml to create the namespace. The annotation ensures that all pods added to the namespace get the linkerd proxy in the pod. All traffic to and from the pod will then pass through the proxy.

Now, let’s install the add service and deployment:

apiVersion: v1
kind: Service
metadata:
  name: add-svc
spec:
  ports:
  - port: 80
    name: http
    protocol: TCP
    targetPort: 8000
  - port: 8080
    name: grpc
    protocol: TCP
    targetPort: 8080
  selector:
    app: add
    version: v1
  type: LoadBalancer
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: add
spec:
  replicas: 2
  selector:
    matchLabels:
      app: add
  template:
    metadata:
      labels:
        app: add
        version: v1
    spec:
      containers:
      - name: add
        image: gbaeke/adder

The deployment deploys to two pods with the gbaeke/adder image. To deploy the above, save it to a file (add.yaml) and use the following command to deploy:

kubectl create -f add-yaml -n add

Because the deployment uses the add namespace, the linkerd proxy will be added to each pod automatically. When you list the pods in the deployment, you see:

Each add pod has two containers: the actual add container based on gbaeke/adder and the proxy

To see more details about one of these pods, I can use the following command:

k get po add-5b48fcc894-2dc97 -o yaml -n add

You will clearly see the two containers in the output:

Two containers in the pod: actual service (gbaeke/adder) and the linkerd proxy

Generating some traffic

Let’s deploy a client that continuously uses the calculator service:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: add-cli
spec:
  replicas: 1
  selector:
    matchLabels:
      app: add-cli
  template:
    metadata:
      labels:
        app: add-cli
    spec:
      containers:
      - name: add-cli
        image: gbaeke/adder-cli
        env:
        - name: SERVER
          value: "add-svc"

Save the above to add-cli.yaml and deploy with the below command:

kubectl create -f add-cli.yaml -n add

The deployment uses another image called gbaeke/adder-cli that continuously makes requests to the server specified in the SERVER environment variable.

Checking the deployment in the linkerd portal

When you now open the add namespace in the linked portal, you should see something similar to the below screenshot (note: I deployed 5 servers and 5 clients):

A view on the add namespace; linkerd has learned how the deployments talk to eachother

The linkerd proxy in all pods sees all traffic. From the traffic, it can infer that the add-cli deployment talks to the add deployment. The add deployment receives about 150 requests per second. The 99th percentile latency is relatively high because the cluster nodes are very small, I deployed more instances and the client is relatively inefficient.

When I click the deployment called add, the following screen is shown:

A view on the deployment

The deployment clearly shows where traffic is coming from plus relevant metrics such as RPS and P99 latency. You also get a view on the live calls now. Note that the client is using GRPC which uses a HTTP POST. When you scroll down on this page, you get more information about the caller and a view on the individual pods:

A view on the inbound calls to the deployment plus a view on the pods

To see live calls in more detail, you can click the Tap icon:

A live view on the calls with Tap

For each call, details can be requested:

Request details

Conclusion

This was just a brief look at linkerd. It is trivially easy to install and with auto-injection, very simple to add it to your own services. Highly recommended to give it a spin to see where it can add value to your projects!

%d bloggers like this: